Isotech

• Parallel Tube Action — Liquid flows up the rear volume of the bath and down the working volume. This action creates very small vertical and axial gradients. Enabling the smallest overall uncertainties
• Circular Design — The circular design eliminates cold corners in tank-shaped baths
• Heating — All heating is outside the container. By using a large area nickel foil heater the complete bath wall is heated uniformly
• Cooling — The cooling is built-in and also surrounds the calibration volume creating a low temperature ambient in which the heater can function efficiently
• Wider Temperature Range — A unique system removes the coolant from around the calibration volume above ambient and lets the bath heat up to 125°C (121°C is a key sterilization temperature)
• Stability — Better than ±0.030°C over the complete temperature range

 798 Hydra Datasheet

• Stability of ±0.007 °C
• Capable of uncertainties to ±0.0005°C (0.5mK)
• Capable of calibrating liquid in glass thermometers, no level adapters required
• Variable Speed Stirring - allowing optimum performance for a wide range of viscosities
• The Very Best Liquid bath available, used by top temperature labs worldwide

 915 Datasheet

• Universal Input Temperature Indicator included in S Model to allow for programming of up to five “correction” points
• ITS-90 Fixed Points can be used with the Gallium and Triple Point of Water Fixed Point Cells
• Dry or Liquid Bath
• Windows Software and PC Interface
• High Capacity Deep Block for Very Long Thermometers
• Ideal for Laboratory Comparison and Fixed-Point Calibrations

• Stability of ±0.007 °C
• Deep immersion depth (470mm or 18.5”) with low filling costs
• Capable of calibrating liquid in glass thermometers, no level adapters required
• Variable Speed Stirring - allowing optimum performance for a wide range of viscosities
• Over and Under Temperature Protection - protect expensive Water Triple Point (WTP) Cells as well as over temperature conditions

 Orion Datasheet