|
|
|
|
|
|
ISOCAL 6 Calibrators (Europa, Venus & Calisto Models)
|
|
|
-45°C to 250°C (482°F)
Available in the Venus 2140, Calisto 2240 and Europa 6 Models- 6 calibrators in 1
- Liquid baths, infrared, dryblock & ITS-90 fixed points all in one
- 35mm Calibration Volume
- ≤0.3°C Dry Block Accuracy
- Fast Heating and Cooling Time
|
|
|
|
|
|
|
|
|
|
|
|
|
Calibration Bath, Model 796 Orion Deep Immersion Liquid Bath
|
|
|
-40 °C to 300 °C (572°F)
New Available in two ranges, 976 M (-40 °C to 125 °C) and 796H (30 °C to 300 °C)
Stability of ±0.007 °C Deep immersion depth (470mm or 18.5”) with low filling costs Capable of calibrating liquid in glass thermometers, no level adapters required Variable Speed Stirring - allowing optimum performance for a wide range of viscosities Over and Under Temperature Protection - protect expensive Water Triple Point (WTP) Cells as well as over temperature conditions
 Orion Product Spec Sheet
|
|
|
|
|
|
|
|
|
|
|
|
|
Calibration Bath, Model 915 Parallel Tube Liquid Bath
|
|
|
Large Volume Fluid Bath with Optional External Single and Two Stage Chillers
As low as -65°C to 300°C
|
|
|
|
|
|
|
|
|
|
|
|
|
ISOCAL6 Calibration Baths, Hyperion & Drago Models
|
|
|
-50°C to 250°C (482°F)
Available in Drago and Hyperion Models- 2.5” (65mm) Diameter Calibration Volume
- Portable Liquid Bath for high accuracy calibration of awkward shaped sensors
- Convertible for Dry Block Operation and more
- Calibrates All Sensor Types
- Windows Software and PC Interface
- Available in the Hyperion 936 and Drago 394 Models
Isocal 6 (Large Volume) Product Spec Sheet
|
|
|
|
|
|
|
|
|
|
|
|
|
OCEANUS 6 - P.O.T.T.S Temperature Calibrator
|
|
|
Block Calibrator or Automated Fixed Points
-25°C to 140°C (282°F)
10" Deep for Long Sensors
Optional Inserts for Black Body & Liquid Bath
- Universal Input Temperature Indicator included in S Model to allow for programming of up to five “correction” points
- ITS-90 Fixed Points can be used with the Gallium and Triple Point of Water Fixed Point Cells
- Dry or Liquid Bath
- Windows Software and PC Interface
- High Capacity Deep Block for Very Long Thermometers
- Ideal for Laboratory Comparison and Fixed-Point Calibrations
|
|
|
|
|
|
|
|
|
|
|
|
|
Calibration Baths, Hydra Series Oil Baths
|
|
|
New Range of Stirred Liquid Baths, Superior stability and vertical uniformity
-80°C to 300°C (572°F)
- Parallel Tube Action — Liquid flows up the rear volume of the bath and down the working volume. This action creates very small vertical and axial gradients. Enabling the smallest overall uncertainties
- Heating — All heating is outside the container. By using a large area nickel foil heater the complete bath wall is heated uniformly
- Cooling — The cooling is built-in and also surrounds the calibration volume creating a low temperature ambient in which the heater can function efficiently
- Wider Temperature Range — A unique system removes the coolant from around the calibration volume above ambient and lets the bath heat up to 125°C (121°C is a key sterilization temperature)
- Commercial Grade Chillers — The chillers are 1/3 horse power commercial grade units (not cheaper domestic grade as used by some manufacturers)
- Stability — Better than ±0.01°C over the complete temperature range
- Calibration Depth — Double the depth of some baths, the Hydra Range has up to 300mm depth of immersion
- Circular Design — The circular design eliminates cold corners in tank-shaped baths
- Fast Cool Down — Goes from ambient to -80°C in 150 min
|
|
|
|
|
|
|
Powered by Volusion Shopping Cart Software.