To calibrate temperature sensors to 250°C look no further than Isotech's portable stirred liquid baths. The Hyperion calibrates from -25°C to 140°C (284°F) and the Drago from ambient to 250°C (482°F). The useable calibration volume is a massive 2.5" (65mm)
diameter and the overall depth of 7.5" (190mm) gives more than twice the volume of competitors' products.
Stirred liquid baths are suitable for temperature sensors of all types, shapes and sizes. Stabilities are much greater than those from Dry
Blocks alone and with suitable reference thermometers performance of up to 0.005°C is achievable.
The Hyperion and the Drago are available in two models. If the liquid is directly in the block then the controller only model, or Basic (B)
model, can be selected. However, instead of putting liquids directly in the block liquid containers can be used to facilitate rapid change
of liquids. When using a liquid container, Dry Block Insert, Blackbody Target or the Surface Sensor Kit a separate reference thermometer
should be used to compensate for the varying offset between the controller and the accessory temperature. In this case you should
choose the site version (S) which includes a built-in temperature indicator for high accuracy or for best accuracy an external indicator
can be used. An ideal combination is the F100 or MilliK thermometers with a 935-14-16 Reference Probe.
Includes as standard: Windows Software, Computer Interface and a Ramp to Set Point Feature. The controller features multi-point block to display correction giving excllent absolute accuracy.
Powered by Volusion Shopping Cart Software.