Electrical Calibrators
You are here: Home > Electrical Calibrators
Sort By:
Page of 1  
PIE 512S Read & Source RTD Calibrator
Our Price: $985.00

Read & Source RTD Calibrator

  • Accurate to ± 0.25°C (± 0.4°F) with 0.1° Resolution
  • Simulate/Read RTD sensors
  • Calibrate/Read directly in temperature for your RTD curve or Ω
  • Select from 7 RTD types or Ω (custom curves available)
  • PATENT PENDING AUTO DETECTION OF 2, 3, OR 4 WIRE CONNECTION INDICATOR
  • Guaranteed to Work with All Pulsed Instruments
  • Works with a wide variety of transmitters
  • Compatible with devices using pulsed excitation currents including PLCs, DCS, Recorders, and all others
  • EZ-Dial ™ Knob Easily adjust output for full temperature range by 0.1 °
  • EZ-Check ™ Switch for easy 0% and 100% span adjustments
  • Selectable Auto Stepping
  • 45 hour battery life
PIE 525 Dual RTD/TC Source & Read with Ramping/Stepping
Our Price: $1,255.00

High Accuracy Dual RTD/TC Sources & Read with Ramping/Stepping

  • Accurate to ± 0.2°C (± 0.4°F) with 0.1° or 0.01° Resolution
  • Direct Temperature Input/Output
  • Eight Standard T/C Types available: J, K, E, T, R, S, B, N and mV
  • Eight RTD Curves available - Platinum, Copper, Nickel & Ù
  • PATENT PENDING AUTO DETECTION OF 2, 3, OR 4 WIRE CONNECTION INDICATOR
  • Guaranteed to Work with All Pulsed Instruments
  • Works with a wide variety of transmitters
  • EZ-Dial™ knob easily adjust output by 0.1°
  • EZ-Check™ switch for 0% and 100% span adjustments
  • 45 hour battery life
  • RTD Wire Kit and Carrying Case Included FREE
  • NIST Traceable Calibration Certificate included FREE
PIE 530 4-20 mA Loop Calibrator
Our Price: $655.00

4-20mA Loop Calibrator

  • Accuracy to 0.012% of reading
  • Read and Source 0.000 to 24.000mA
  • Display milliamperes or -25.00 to 125.00% of 4-20mA
  • Bar graph displays % of 4-20mA
  • Read 0.00 to 60.00 volts with over range indication to ± 100 volts
  • Drive 1200 Ω
  • User selectable 250Ω resistor in series with the output for compatibility with HART® protocol enabled devices
  • EZ-Dial™ knob easily adjust output by 0.01mA (0.01%) or 0.10mA (1.00%)
  • User settable EZ-Check™ for 0% and 100% span adjustments.
  • Adjustable auto-ramping/auto-stepping functions
  • Power measure and simulate 2-wire transmitter
  • 40 hour battery life
  • NIST Traceable Calibration Certificate included FREE
PIE 531 Pocket-Mate Cal-400 Loop Analyzer
Our Price: $495.00

4-20mA Loop Calibrator

  • True ± 0.05% of reading accuracy
  • Source and read 0.00 - 24.00mA
  • Simulate 2-wire transmitters 0.00 - 24.00mA
  • Power 2-wire transmitters and read 0.00 - 24.00mA
  • Display current in mA or -25.00 - 125.00% of 4-20mA
  • Full 4 digit display
  • Drive 1200Ω
  • User selectable 250Ω resistor in series with the output for compatibility with HART® protocol enabled devices
  • EZ-Dial™ knob easily adjust output by 0.01mA (0.01%) or 0.10mA (1.00%)
  • User settable EZ-Check™ for 0% and 100% span adjustments
  • 45 hour battery life
  • NIST Traceable Calibration Certificate included FREE
PIE 532 4-20 mA/V Calibrator with Loop Diagnostic
Our Price: $895.00

4-20A/Voltage Loop Calibrator with Loop Diagnostics
Carrying Case Included

  • True ± 0.012% of reading accuracy
  • Source and Read 0.000-24.000 mA
  • Simulate 2-Wire Transmitters
  • Power 2-Wire Transmitters and Read 0.000-24.000mA
  • Display current in mA or -25.00-125.00 % of 4-20 mA
  • Read 0.00 to ± 30.00 VDC with 4X over range ability
  • Source 0.000 to 24.000 VDC with up to 20mA output
  • Direct Calibration 1.000V to 5.000V
  • Auto Step or Ramp
  • Selectable step sizes, time in-between steps & soak time
  • Full 5 Digit Display
  • 240 VAC Tolerant
  • HART® protocol compatibility mode
  • Power on selectable 250Ω resistor in series with the output for compatibility with HART® protocol enabled devices.
  • NIST Traceable Calibration Certificate included FREE
PIE 535 4-20 10-50 mA Loop Calibrator
Our Price: $2,475.00

4-20 & 10-50 mA/Voltage
Carrying Case, AC Adapter and NIST Traceable Test Data included

  • True ± 0.025% of reading
  • Read and Source 0.000 to 50.000 mA
  • Display current or -25.00 to 125.00% of 4-20mA or 10-50mA
  • Bar graph displays % of 4-20mA or 10-50 mA
  • Read 0.00 to 60.00 volts with 2X over range ability
  • Simulate 2-Wire Transmitters
  • Power 2-Wire Transmitters and Read 0.000-50.000mA
  • Read 0.00 to ± 30.00 VDC with 4X over range ability
  • Source 0.000 to 24.000 VDC with up to 20mA output
  • Direct Calibration 1.000V to 5.000V
  • Auto Step or Ramp with HIGH accuracy and repeatability designed in collaboration with Nuclear plants
PIE 541 Frequency Read & Source with Totalizer
Our Price: $945.00

Frequency Calibrator with Totalizer
020-0207 Wire kit now included!

  • Accuracy ± 0.005%
  • Optional HIGH Accuracy up to 0.002%
  • Totalize inputs/outputs from 1 to 99999 in 1.0 to 100.0 minutes
  • Read a wide range of frequencies and waveforms from 50mV to 120V peak.
  • Source sine and square waves, zero based, or zero crossing
  • Adjustable amplitude from 100mV to 12V peak-to-peak
  • EZ-Dial™ knob easily adjust output by 1
  • EZ-Check™ switch for 0% and 100% span adjustments
PIE 334 4-20 mA Loop Calibrator
Our Price: $630.00

4-20mA Loop Calibrator

0.025% accuracy
  • Source 0.000 to 24.000mA
  • Read 0.000 to 52.000
  • Display milliamperes or -25.00 to 125.00% of 4-20mA
  • Bar graph displays % of 4-20mA
  • Read 0.00 to 60.00 volts with over range indication to ± 100 volts
  • Drive 1200 Ω
  • EZ-Dial™ knob easily adjust output by 0.01mA (0.01%)
  • User settable EZ-Check™ for 0% and 100% span adjustments
  • Fuseless protection from accidental misconnection or misuse
  • Power measure and simulate 2-wire transmitter
  • Superior battery life of 70 hours under typical usage