You are here: Home > Liquid Baths & Dry Blocks

Liquid Baths & Dry Blocks

Sort By:
Page of 1
Isotech 525, the World's First -100°C Dry Block Calibrator Isis 525 is the World's First -100C Dry Block Calibrator

Minimum temperature of -100C (-148C)
  • Stability: 0.02C at -90C.
  • No hazardous or expensive liquids.
  • 20,000 hours of testing, equal to 10 years of use.
  • Uses flexible heat pipe to transfer energy.
  • C.E. approved.
  • UKAS/ILAC, NIST Traceable Certification availiable.
525 Datasheet

Isotech, HYDRA series Calibration Baths (-80°C to 300°C) Calibration Baths, Hydra Series Oil Baths

Liquid Calibration Baths, -80C to 300C (572F) in Three Models
  • Parallel Tube Action: Liquid flows up the rear volume of the bath and down the working volume. This action creates very small vertical and axial gradients. Enabling the smallest overall uncertainties
  • Circular Design: The circular design eliminates cold corners in tank-shaped baths
  • Heating:All heating is outside the container. By using a large area nickel foil heater the complete bath wall is heated uniformly
  • Cooling: The cooling is built-in and also surrounds the calibration volume creating a low temperature ambient in which the heater can function efficiently
  • Wider Temperature Range:A unique system removes the coolant from around the calibration volume above ambient and lets the bath heat up to 125C (121C is a key sterilization temperature)
  • Stability Better than 0.030C over the complete temperature range
Hydra Series Oil Baths Datasheet

Isotech, Deep Immersion Calibration Baths, Orion 796 Orion 796 Deep Immersion Calibration Baths

New Deep Immersion Calibration Baths Available in Three Ranges Covering -80C to 300 C
  • Stability: 0.007 C
  • Deep immersion (470mm or 18.5) with low filling costs
  • Capable of calibrating liquid-in glass-thermometers, no level adapters required
  • Variable Speed Stirring - allowing optimum performance for a wide range of viscosities
  • Over and Under Temperature Protection - protect expensive Water Triple Point (WTP) Cells as well as over temperature conditions
Orion Datasheet

Isotech, Calibration Baths, Libra 785 Libra 785 Parallel Tube Calibration Baths

New- Parallel Tube Calibration Baths Available in Three Ranges Covering -80C to 300 C
  • Stability: 0.003C
  • Uncertainty: to <1mK
  • Deep immersion (485mm or 19in) with low filling costs
  • Capable of calibrating liquid in glass thermometers, no level adapters required
  • Variable Speed Stirring - allowing optimum performance for a wide range of viscosities
Libra 785 Datasheet

QUICKCAL - Hand-Held Dry Block Temperature Calibrator QUICKCAL - Hand-Held Dry Block Temperature Calibrator

Two models available, 30C to 350C (662F), and -12C to 140C (284F)
  • Better accuracy: 0.4C to 0.2C, using comparison techniques
  • Wide temperature ranges: cover most sensor types with just two units
  • Fast: Nine minutes to reach temperature
  • Light, compact, and portable
  • Interchangeable Inserts: with one unit to suit different sensor diameters
QuickCal Datasheet

Base Price: $2,565.00
Isotech, ISOCAL 6 Calibrators, Combined Dry Block and Liquid Baths ISOCAL6 Dry Block Calibrators, Europa, Venus & Calisto

3 Models to choose from, covering -45C to 250C (482F)
  • 6 Calibration Functions in 1
  • Accuracy: 0.15C (display to block)
  • Liquid bath, infrared, dry block, & ITS-90 fixed points all in one
  • 35mm calibration volume
  • Fast heating and cooling times
Isocal 6 (Standard Volume) Datasheet

Base Price: $4,808.00
Isotech Fastcal Dryblock Temperature Calibrators Dryblock Calibrators, Fast Cal Series Drywells

3 Temperature Ranges: Low -35C to 140C, Medium 30C to 350C and High 35C to 650C

  • Rugged & Lightweight : (15 lbs.)
  • Accuracies: 0.15C to 2C, model & range dependent
  • Fast response, high stability
  • Standard PC interface with software
  • 5 point NIST traceable calibration certificate included.
FastCal Datasheet

Base Price: $5,138.00
Isotech, Jupiter 650 Dry Block Calibrator JUPITER 650 - High Temperature Dry Block Calibrator

Temperature Range of 30C to 650C (1202F)
  • Accuracy: 0.3C (display to block)
  • Uniformity: Use of a specialized high conductivity block results in superior uniformity
  • Wide Operating Range: Fast response up to 650C (1202F) ideal for field use
  • Simple to Use and Outstanding Value
  • Calibrate to entire loop by using a heat source rather than an electrical simulator, a test instrument and sensor can be calibrated as a system
Jupiter 650 Datasheet

Base Price: $5,152.00
820 Large Volume Calibration Bath

Model 820 Large Volume Calibration Bath

Temperature Range: 30C to 200C

  • Comparison Accuracy: 0.01C
  • Large volume: 185mm x 140mm x 300mm
  • Can calibrate a number of sensors at once>/li>
  • Can maintain standard sensors at a constant temperature
  • Robust construction, yet portable

Base Price: $5,760.00
ISOCAL 6 Calibrators, Combo Baths, Dry Block and Liquid in one ISOCAL 6 Calibration Baths, Hyperion & Drago Models

Temperature range covering -25C to 250C (482F), in two models

  • Accuracy: 0.15C (display to block)
  • Calibration Volume: 2.5" (65mm) x 6" (160mm)
  • Portable Liquid Bath for high accuracy calibration of awkwardly shaped sensors
  • Convertible for Dry Block Operation and more
  • Calibrates All Sensor Types
Isocal 6 (Large Volume) Datasheet

Base Price: $5,793.00
Isotech, Pegasus 1200, High Temp Drywell PEGASUS 1200 - High Temperature Dry Block Calibrator

Temperature Range of 150C to 1200C (2192F)
  • Accuracy: 3.0C (display to block)
  • Calibration Volume: 33.5mm x 130mm (1.25" x 5.1")
  • Stability: Better than 0.3C over the range
  • Unique Accessories: Infrared calibration and fast cool down attachments
  • Ideal for R & S thermocouple calibrations
  • Suitable for most high temperature switches
Pegasus 1200 Datasheet

Base Price: $5,916.00
Isotech Gemini High Capacity Dry Blocks up to 700°C GEMINI - High Capacity Dry Block Calibrators

Temperature Range of 30C to 700C (1292F)
  • Display to Block Accuracy: Better than 0.5C
  • Calibrate Whole Calibration Loop - Using a heat source rather than an electrical simulator, a test instrument and probe can be calibrated as a system.
  • High Capacity Block: Large Calibration volume for many sensors and low loading errors.
  • Two Operating Ranges: Fast response from ambient to 550C (1022F) or ambient to 700C (1292F)
  • Simple To Use - Outstanding Value for Your Money!
Gemini Product Spec Sheet

Base Price: $5,984.00
Isotech, Oceanus 6, Deep Immersion Dry Block Oceanus 6 - P.O.T.T.S Temperature Calibrator

Temperature Range of 25C to 140C (282F)
Optional Inserts for Black Body & Liquid Bath
  • Accuracies: 0.0002C at Water Triple Point
  • Dry or Liquid Bath
  • Windows Software and PC Interface
  • High Capacity Deep Block for Very Long Thermometers
  • Ideal for Laboratory Comparison and Fixed-Point Calibrations
Oceanus 6 Datasheet

Base Price: $11,068.00
Isotech, Medusa 3 Zone Temperature Calibrator MEDUSA - P.O.T.T.S Temperature Calibrator

3-Zone Block Calibrator for Automated Fixed Points
Temperature Range of 30C to 700C (1292F)
  • High Capacity Deep Block: 1.75 diameter x 11.25 deep (45mm x 285mm)
  • Absolute Stability: 0.03C
  • Use for Comparison and Fixed-Point Calibration
  • Use With Very Long Thermometers
  • Blackbody Target and Surface Sensor Kit Options
Medusa Product Spec Sheet

Base Price: $12,989.00