Isotech

3 Zone Block Calibrator or Automated Fixed Points

30°C to 700°C (1202°F)

• High Capacity Deep Block -- 1.75” diameter x 11.25” deep (45mm x 285mm)
• Use for Comparison and Fixed-Point Calibration
• Use With Very Long Thermometers
• Blackbody Target and Surface Sensor Kit Options

 Medusa Product Spec Sheet

Isotech has a wide range of Dry Blocks to suit probes requiring a large immersion depth. These products feature large and deep calibration volumes. As such they are less portable then the earlier Dry Blocks, but have higher capacities and retain outstanding temperature uniformity, this uniformity is so good that these larger products are most suitable as apparatus for Secondary Laboratories to realize the Fixed Points of ITS-90.

For Comparison Calibration the Medusa should be used with an insert, the standard insert has six 0.3" pockets 9.8" deep (8mm x 250mm). Also available is an insert 1.7" in diameter x 6.7" deep (44mm x 170mm) which is suspended from the top of the block so that the height is user adjustable. For flexibility the Medusa can also be used with accessories for infrared thermometers and surface sensors. The Medusa is available in both the BASIC (B) and the SITE (S) models.

 Medusa 510 Product Spec Sheet Medusa 510-511 Manual