Isotech

Block Calibrator or Automated Fixed Points

-25°C to 140°C (282°F)
10" Deep for Long Sensors
Optional Inserts for Black Body & Liquid Bath

• Universal Input Temperature Indicator included in S Model to allow for programming of up to five “correction” points
• ITS-90 Fixed Points can be used with the Gallium and Triple Point of Water Fixed Point Cells
• Dry or Liquid Bath
• Windows Software and PC Interface
• High Capacity Deep Block for Very Long Thermometers
• Ideal for Laboratory Comparison and Fixed-Point Calibrations

Temperature Range: 45°C below ambient to +110°C
Absolute Minimum Temperature: -45°C
Absolute Stability over 30 minutes: Metal Block Bath: ±0.03°C, Stirred Liquid Bath: ±0.025°C, Ice/Water Bath: ±0.001°C, Blackbody Source: ±0.3°C, Surface Sensor Calibrator: ±0.5°C ITS-90 Fixed Point Apparatus: ±0.0002°C,
Stabilization Times: 10 minutes
Calibration Volume: 52mm diameter by 300mm deep
Uniformity: ±0.018°C
Controller Resolution: 0.1 to 0.01 (4 digit display)
Indicator Resolution: 0.1 to 0.01 (4 digit display)
Indicator Units: °C, °F, K
Communications: Supplied as standard with serial interface, PC adapter cable and Cal Notepad
Power: 300W, 110VAC ±10%, 50/60Hz
Overall Dimensions: 430mm x 310mm x 300mm (HxWxD)
Weight: 37.48 lbs (17 kg)

The Oceanus-6 has all the advantages of the Isocal-6 models but with a substantially larger calibration volume, 2 inch diameter by 11.8 inches deep (52mm x 300mm). The Oceanus-6 can be used as a Dry Block, a Liquid Bath, a Blackbody Source for infrared thermometers, a Surface Sensor Calibrator and for performance to a few mK (0.001°C) ITS-90 Fixed Points. Like all Isotech calibrators Oceanus-6 is available in two models, the BASIC (B) version with one controller, and the SITE (S) version with onboard secondary display for high accuracy digital probe matching.

 Oceanus 6 Product Spec Sheet