You are here: Home > Products > Software
I-cal EASY Automatic Calibration Software Use I-Cal Easy to automate sensor calibration, enter up to 20 calibration points
  • Windows 10 / 8 / 7 / XP
  • Fully Automatic Calibration
  • Design and Print Certificates
  • Calculate Coefficients
  • Prints PRT and TC tables
  • Supports more equipment
  • Try the full version free for 30 days
Download
Cal Notepad - Software to Control, Monitor and Log from Isotech Equipment Use Cal NotePad to automatically log and display the temperature of an Isotech calibration bath together with the unit under test.
  • Easy to use
  • Interface to Isotech Block Baths & Temperature Indicators
  • Log Chart and Export data - Control Calibration Bath - Read Standard
Download
Icarus - ITS-90 Software for SPRTs Icarus is designed to calculate and display the relationship between resistance and temperature for Standard Platinum Resistance Thermometers between the triple point of Hydrogen and the freezing point of Silver. All calculations are performed using the equations and values defined in the International Temperature Scale of 1990 (ITS-90).
  • Calculate ITS-90 Coefficients
  • Generate coefficients from data or data from coefficients
  • Design and Print Certificates
  • Use powerful keywords and conditional statements
  • Check the calibration quality
  • Fit extra calibration points to the curve
Icarus is used at Isotech in our accredited laboratories to create certificates fro PRTs and SPRTS calibrated in ITS-90 Fixed Point Cells.
Download
Isotech ADVANCED Block Configuration Utility Isotech Config Utility – this application makes it easy to adjust and set the various options such as sensor input types, units, resolution etc. Download
Setpoint Programmer Editor for ADVANCED Units This allows set point programs to be created on a PC and uploaded to the ADVANCED models.
Supports ADVANCED models with firmware version to A5.4x
Download
Review Lite This is a proprietary software package which allows the user to extract ‘archive’ data from one or more ADVANCED Dry Blocks and to present this data on a host computer, as if on a chart, or as a spreadsheet. Download
PRTCalc - free PRT / RTD Calculator (EN 60751) PRTCalc is a free utility for those involved with PT100 platinum resistance thermometers. It allows for the accurate conversion of resistance to temperature or temperature to resistance. PRTCalc conforms with IEC 751 Amendment 2: December 1995. PRTCalc also knows the values for the earlier issue of IEC 751.

The user may enter custom coefficients to suit individual probes. Probe specific calculations can then be performed with all entered data available stored alongside a tag name for the platinum resistance thermometer supplied.
Download
RBC Software The latest version of the code supports both the current automatic and manual models.
The newer automatic model of the RBC offers improved performance, can be immersed into an oil bath for temperature control and of course offers vastly reduced operator time. There is more information on our website here:

Read More

Note:
The latest version of the RBC software is version 2.4, all the DLLs updated to version 2.4. This can be considered a new starting point. Earlier versions of the DLLs won’t work with version 2.4 of the RBC software and version 2.4 of any of the DLLs won’t work with earlier versions of the RBC software. Anyone who has written their own DLLs and wants to use version 2.4 of the RBC software (or later) will need to change their function calls to CDECL and recompile them. Otherwise a fresh installation is all that is needed.
Download
milliK Firmware Update Software update for the Isotech milliK Precision Thermometer.
Recommended Update.
Adds Support for the millisKanner.
Stability Improvements.
Download
TTI-10 Driver Required for use with Cal Notepad. Download