The F100 precision thermometer is a high-performance, handheld 2-channel thermometer for Pt100 and Thermistor probes. If you're looking for a step up in measurement accuracy with a battery-powered, handheld thermometer with probe sensors, the F100 is for you. Our F100 can handle all your needs, with accuracies and resolutions normally associated with a bench-top thermometer.

Two inputs give you direct temperatures from Pt100 or Thermistor probes, or you can display the temperature difference between them. You can log measurements directly to memory banks of this hand-held temperature probe, or if you prefer, use the USB port to control and data log with your PC. The F100 will display a statistical analysis of your measurements for you, with average value, min and max values, and standard deviation.

Because the F100 hand-held temperature sensor will display in ohms as well as temperature, you can even use it to calibrate one probe against another. Most instruments require you to enter calibrated probe data into memory to optimize measurement accuracy, which can mean a lot of data entry if you change probes regularly. With ASL's SMART connector on your probes, you only need to store the data once — in the connector! The calibration data stays with the probe permanently. You can even use it on another F100 without any further action. The SMART connector saves you time, and reduces error. If you have existing calibrated or uncalibrated probes, no problem! The F100 automatically registers if a probe is SMART or normal.

The F100 offers laboratory performance with handheld convenience.