You are here: Home > Products > Primary Standards > Metrology Furnaces

Metrology Furnaces

Sort By:
Page of 1
Isotech Annealing Furnace, Model 414 Annealing Furnace,
Model 414

Ideal for Annealing and Conditioning SPRTs
30°C to 1000°C (1832°F)

  • Remove Strain and Hardening from your platinum coils
  • Maintenance Free Use
  • Available with programmable controller with communications standard
  • Control: 0.1°C Resolution
  • Supply: 110VAC, 2kw, 50/60Hz CTE (230VAC and 110VAC to 110VAC Isolating Transformers are available)
414 Annealing Furnace Data Sheet 414 Annealing Furnace Data Sheet

Isotech's Oberon Calibration Furnace (450 to 100°C) OBERON 426 - High Temperature Furnace

Compact Heat Pipe Furnace
450°C to 1000°C (1832°F)

  • Heat Pipe Technology Provides Nearly Gradient Free Volume
  • Suits aluminium, silver or copper Fixed Point Cells
  • Can be used for comparison and infrared calibration
  • Stability: ±0.05°C
  • 4 Hours to Temperature
Model 426 Oberon Data Sheet Model 426 Oberon Data Sheet

Isotech Model 465 Metrology Furnace (200°C to 1200°C) Metrology Furnace, Model 465, 3 Zone Temperature Control

3 Zone Control System for Minimal Thermal Gradients for Half the Price of Heat Pipes.
200°C to 1200°C (2192°F)
Ideal for Creating and Maintaining Fixed Points Cells, Indium to Copper

  • Wide Temperature Range: 200°C to 1200°C
  • Covers ITS-90 Fixed Points from tin to copper in one furnace
  • Long plateaus
  • Self-tuning controller optimizes each Fixed Point Cell performance
  • 3 zones controlled to compensate for end loss to give a perfect profile
Model 465 Metrology Furnace Datasheet

Isotech, Spherical Thermocouple Calibration Furnace Thermocouple Calibration Sphere, Model Saturn 877

Spherical Designed Thermocouple Calibrator
100°C to 1300°C (2372°F)

  • Accuracy: ±0.25°C at 1000°C
  • Stability: Spherical design provides unmatched stability and uniformity
  • Uniformity: Central zone of zero heat flux
  • Used internationally by NMIs, thermocouple manufacturers, and the best calibration labs
Model 877 Saturn Datasheet

Isotech, Spherical Blackbody Calibration Source Cyclops Model 878

Our most stable Black Body Source
Temperature Range of 150°C to 1300°C (2372°F)

  • Stability: ±0.1°C
  • Emissivity: > 0.999
  • Wide Temperature Range
  • Spherical Black Body Source
  • Can be Adapted for Thermocouple Calibration 877 Saturn
Model 878 Cyclops Datasheet

Isotech Heat Pipe Temperature Metrology Furnaces Heat Pipe Metrology Furnaces

Stress-Free Heat Pipes
125°C to 1090°C (1994°F)
  • Essentially Gradient Free
  • Heat pipe Operation from Indium to Copper
  • Simple Use - no zone offsets to adjust
Heat Pipe Metrology Furnace Datasheet

Isotech Low Temperature Metrology Furnace Low Temperature Metrology Furnace

Temperature Range: 50°C to 500°C (932°F)
  • Uncertainty: <1mK (with cells)
  • Control: 0.1°C resolution, power feedback
  • Affordable single-zone furnace
  • For indium, tin and zinc fixed-point cells
  • Simple operation
Low Temperature Furnace Datasheet

Isotech Medium Temperature Metrology Furnace Medium Temperature Metrology Furnace

Temperature Range: 50°C to 700°C (1292°F)
  • Uncertainty: <1mK (with cells)
  • Control: 0.1°C resolution
  • Wide operating range
  • For indium, tin, zinc, and aluminum cells
  • Three-zone design
Medium Temperature Metrology Furnace Datasheet