You are here: Home > Services

Isotech Services
Sort By:
Page of 1
Isotech, Deep Immersion Calibration Baths, Orion 796 Orion 796 Deep Immersion Calibration Baths

Deep Immersion Calibration Baths Available in Three Ranges Covering -80°C to 300 °C
  • Stability: ±0.007 °C
  • Deep immersion (470mm or 18.5”) with low filling costs
  • Capable of calibrating liquid-in glass-thermometers, level adapter required
  • Variable Speed Stirring - allowing optimum performance for a wide range of viscosities
  • Over and Under Temperature Protection - protect expensive Water Triple Point (WTP) Cells as well as over temperature conditions
Orion Datasheet

QUICKCAL - Hand-Held Dry Block Temperature Calibrator QUICKCAL - Hand-Held Dry Block Temperature Calibrator

Two models available, 30°C to 350°C (662°F), and -12°C to 140°C (284°F)
  • Better accuracy: 0.4°C to 0.2°C, using comparison techniques
  • Wide temperature ranges: cover most sensor types with just two units
  • Fast: Nine minutes to reach temperature
  • Light, compact, and portable
  • Interchangeable Inserts: with one unit to suit different sensor diameters
QuickCal Datasheet

Base Price: $3,241.00
Isotech Fastcal Dryblock Temperature Calibrators Dryblock Calibrators, Fast Cal Series Drywells

3 Temperature Ranges: Low -35°C to 140°C, Medium 30°C to 350°C and High 35°C to 650°C

  • Rugged & Lightweight : (15 lbs.)
  • Accuracies: ±0.15°C to ±2°C, model & range dependent
  • Fast response, high stability
  • Standard PC interface with software
  • 5 point NIST traceable calibration certificate included.
FastCal Datasheet

Base Price: $5,702.00
Isotech, ISOCAL 6 Calibrators, Combined Dry Block and Liquid Baths ISOCAL6 Dry Block Calibrators, Europa, Venus & Calisto

3 Models to choose from, covering -45ºC to 250ºC (482ºF)
  • 6 Calibration Functions in 1
  • Accuracy: ±0.15ºC (display to block)
  • Liquid bath, infrared, dry block, & ITS-90 fixed points all in one
  • 35mm calibration volume
  • Fast heating and cooling times
Isocal 6 (Standard Volume) Datasheet

Base Price: $6,081.00
Isotech, Jupiter 650 Dry Block Calibrator JUPITER 650 - High Temperature Dry Block Calibrator

Temperature Range of 30°C to 650°C (1202°F)
  • Accuracy: ±0.3°C (display to block)
  • Uniformity: Use of a specialized high conductivity block results in superior uniformity
  • Wide Operating Range: Fast response up to 650°C (1202°F) ideal for field use
  • Simple to Use and Outstanding Value
  • Calibrate to entire loop by using a heat source rather than an electrical simulator, a test instrument and sensor can be calibrated as a system
Jupiter 650 Datasheet

Base Price: $6,516.00
820 Large Volume Calibration Bath 820 Large Volume Calibration Bath

Temperature Range: 30°C to 200°C
  • Comparison Accuracy: ±0.01°C
  • Large volume: 185mm x 140mm x 300mm
  • Can calibrate a number of sensors at once
  • Can maintain standard sensors at a constant temperature
  • Robust construction, yet portable
Model 820 Data Sheet 820 Large Calibration Bath Datasheet

Base Price: $7,286.00
ISOCAL 6 Calibrators, Combo Baths, Dry Block and Liquid in one ISOCAL 6 Calibration Baths, Hyperion & Drago Models

Temperature range covering -25°C to 250°C (482°F), in two models

  • Accuracy: ±0.15°C (display to block)
  • Calibration Volume: 2.5" (65mm) x 6" (160mm)
  • Portable Liquid Bath for high accuracy calibration of awkwardly shaped sensors
  • Convertible for Dry Block Operation and more
  • Calibrates All Sensor Types
Isocal 6 (Large Volume) Datasheet

Base Price: $7,327.00
Isotech, Pegasus 1200, High Temp Drywell PEGASUS 1200 - High Temperature Dry Block Calibrator

Temperature Range of 150°C to 1200°C (2192°F)
  • Accuracy: ±3.0°C (display to block)
  • Calibration Volume: 33.5mm x 130mm (1.25" x 5.1")
  • Stability: Better than ±0.3°C over the range
  • Unique Accessories: Infrared calibration and fast cool down attachments
  • Ideal for R & S thermocouple calibrations
  • Suitable for most high temperature switches
Pegasus 1200 Datasheet

Base Price: $7,485.00
Isotech Gemini High Capacity Dry Blocks up to 700°C GEMINI - High Capacity Dry Block Calibrators

Temperature Range of 30°C to 700°C (1292°F)
  • Display to Block Accuracy: Better than ±0.5°C
  • Calibrate Whole Calibration Loop - Using a heat source rather than an electrical simulator, a test instrument and probe can be calibrated as a system.
  • High Capacity Block: Large Calibration volume for many sensors and low loading errors.
  • Two Operating Ranges: Fast response from ambient to 550°C (1022°F) or ambient to 700°C (1292°F)
  • Simple To Use - Outstanding Value for Your Money!
Gemini Datasheet

Base Price: $7,567.00
Isotech, Oceanus 6, Deep Immersion Dry Block Oceanus 6 - P.O.T.T.S Temperature Calibrator

Temperature Range of -25°C to 140°C (282°F)
Optional Inserts for Black Body & Liquid Bath
  • Accuracies: ±0.0002°C at Water Triple Point
  • Dry or Liquid Bath
  • Windows Software and PC Interface
  • High Capacity Deep Block for Very Long Thermometers
  • Ideal for Laboratory Comparison and Fixed-Point Calibrations
Oceanus 6 Datasheet

Base Price: $12,011.00
Isotech, Medusa 3 Zone Temperature Calibrator MEDUSA - P.O.T.T.S Temperature Calibrator

3-Zone Block Calibrator for Automated Fixed Points
Temperature Range of 30°C to 700°C (1292°F)
  • High Capacity Deep Block: 1.75” diameter x 11.25” deep (45mm x 285mm)
  • Absolute Stability: ±0.03°C
  • Use for Comparison and Fixed-Point Calibration
  • Use With Very Long Thermometers
  • Blackbody Target and Surface Sensor Kit Options
Medusa Datasheet

Base Price: $13,679.00
Isotech, Pegasus T, High Temp Drywell for Short Sensors PEGASUS T - High Temp - Short Sensor Dry Block

Temperature Range of 150°C to 1100°C (2012°F)
  • Ideal for High Temperature Short Sensors
  • Stability: ±0.05°C at 150°C; ±0.08°C at 1100°C
  • Unique Features: 3 Calibration Zones for different depths
  • Control from External Reference Sensor
  • Suitable for most high temperature switches
Pegasus-T

Base Price: $16,205.00