Home > Products > Primary Standards > Liquid Calibration Baths >

Orion 796 Deep Immersion Calibration Baths
Isotech, Deep Immersion Calibration Baths, Orion 796
New Deep Immersion Calibration Baths Available in Three Ranges Covering -80C to 300 C
  • Stability of 0.007 C
  • Deep immersion depth (470mm or 18.5) with low filling costs
  • Capable of calibrating liquid in glass thermometers, no level adapters required
  • Variable Speed Stirring - allowing optimum performance for a wide range of viscosities
  • Over and Under Temperature Protection - protect expensive Water Triple Point (WTP) Cells as well as over temperature conditions

Product Code: ORION-796

   Product Description    Downloads

High Temperature Calibration Oil Bath "Orion 796"

Deep Immersion Calibration Bath

The Isotech Hydra range of calibration baths have proved very successful since their introduction in 2003.

The Orion range has been introduced to fit alongside the Hydra models. The Orion calibration baths offer deeper calibration volumes than the Isotech Hydra series with world class temperature stability.There is a high temperature model (30C to 300C) and two models with built in refrigeration (-40C to 125C) and (-80C to 125C).

These deep stirred liquid baths are suitable for the low uncertainty calibration of long thermometers including liquid in glass and extended length SPRTS.The Orion unit has sufficient depth, 470mm (18.5), to accommodate Isotechs largest Water Triple Point Cells providing a cost effective sub mK calibration system. There are accessories to hold Mercury, Water, Gallium and Indium ITS-90 Fixed Point Cells.

Isotech baths have always been designed for thermometer calibration, setting the standard for immersion depth versus filling costs. As the Orion requires just 8.5L of fluid it offers significant cost savings, both initial and the on going running costs, when compared to other larger volume baths.In operation the liquid level is within 10mm of the top lid allowing calibration of liquid in glass thermometers without the need for complicated accessories.

Model 796L 796M 796H
Temp Range -80C - 125C -40C - 125C 30C - 300C
Volume 150mm Diameter, 470mm Deep (8.5 litres) 150mm Diameter, 470mm Deep (8.5 litres) 150mm Diameter, 470mm Deep (8.5 litres)
Absolute Stability 0.006C
(Methanol, -80C)
(Methanol, -40C)
(C10 Oil, 125C)
Vertical Uniformity 0.005C
(Methanol, 0C)
(Methanol, 0C)
(C10 Oil, 125C)
Heating Time 25C to 125C < 50 mins (C10 Oil) 25C to 125C < 50 mins (C10 Oil) 30C to 300C < 120 mins (VH Oil)
Cooling Time 0C to -80C < 240 mins
10C o -40C < 180 mins
Communications Includes Serial Interface, PC Cable and Software Includes Serial Interface, PC Cable and Software Includes Serial Interface, PC Cable and Software
Dimensions W 485mm wide
D 525 deep
H 1150
W 485mm wide
D 525 deep
H 1150
W 485mm wide
D 525 deep
H 1150
Weight 78kg 68kg 48kg
Safety Compliant to CE Regulations Compliant to CE Regulations Compliant to CE Regulations
Power 2.8kW
108-130 or 208-240V, 50/60Hz
108-130 or 208-240V, 50/60Hz
108-130 or 208-240V, 50/60Hz

Isotech Orion Calibration Bath Isotech Orion Manual Isotech Orion Evaluation Report Isotech Orion Calibration Bath
Orion Datasheet Orion Manual Orion Evaluation Report Espaol

Related Product or Accessories for this product...
ISOCAL 6 Calibration Baths, Hyperion & Drago Models Calibration Bath, Model 915 Parallel Tube Liquid Bath MilliK Precision Thermometer
Base Price: $5,742.00

Add to Cart

Add to Cart
Base Price: $4,985.00

Add to Cart
ISOCAL 6 Calibrators, Combo Baths, Dry Block and Liquid in one Isotech, 915 High Performance Liquid Calibration Bath Isotech, MilliK Precision Thermometer

Copyright  Isotech North America. All Rights Reserved.